Kaya Safety

New

Techno Arm Mobile Set

TECHNO ARM MOBILE SET

• Designed to be used as fall arrest and rescue system when working in manholes, platforms, silos, roof edges etc. • Made of aluminum alloy material. It is light weight. Transportation and installation can be performed by one person. • It has 360-degree rotatable console body. Can be fixed when requested. • The cantilever can be adjusted in eight different positions in accordance with the required angle, position and height. Switching inpositions is easily accomplished by changing the pin position. • It has more than one ground sleeve for different working areas. • Retractable Fall Arrester with Recovery Arm and / or Hand Winch can be mounted on anchorage body. * Certified with 3 independent anchor points with a 100 Kg dynamic load. Maximum SWL is 300 Kg for static loads.

Product Specifications

• Designed to be used as fall arrest and rescue system when working in manholes, platforms, silos, roof edges etc.

• Made of aluminum alloy material. It is light weight. Transportation and installation can be performed by one person.

• It has 360-degree rotatable console body. Can be fixed when requested.

• The cantilever can be adjusted in eight different positions in accordance with the required angle, position and height. Switching inpositions is easily accomplished by changing the pin position.

• It has more than one ground sleeve for different working areas.

• Retractable Fall Arrester with Recovery Arm and / or Hand Winch can be mounted on anchorage body.

* Certified with 3 independent anchor points with a 100 Kg dynamic load. Maximum SWL is 300 Kg for static loads.

Weight:

29,00 kg (Techno Arm 130 cm)

68,00 kg Total Set weight (Techno Arm 130 cm + MP-100 Mobile Pod)

Standard: EN 795:2012 Type B

TECHNO ARM Console

• Techno Arm (130 cm)

TECHNO ARM Base Plate

• MP-100 Mobile Leg

TECHNO ARM Optional Equipment